- Base: 5 inches - Width: 5 Inches - Fixture Height: 13 inches - Total Depth: 6 inches (from the wall to the outer side of the fixture) - Shades Size: 4-1/2 inches X 6-1/4 inches
TECHNICAL SPECIFICATIONS:
- Voltage: 110-240V - Max Wattage: 60 watts/socket - Socket Type: Medium Base (E26) - Installation: Hardwired - Finish: Black and brushed brass - Configuration: Flat back plate in brass and a wider middle part, black shades, 2 rings on each side of the center band (4 rings per sconce) — ring #1 immediately adjacent to the shade having the same diameter as the “in-contact” part of the shade; and the ring #2 sitting towards the center and having slightly larger diameter spaced like in the example sconce (refer to messages).
*Compatible with medium base bulbs including Edison, LED, and CFL.
Feel free to contact me if you have any questions or comments.
NOTES:
- Lead Time: 4 weeks, earlier if possible.
- Any imperfections present on the lamp are inherent to the handmade nature of this light.
- All hand finishes might show variations in tone and/or little imperfections, this is to be expected.
- Due to variations on computer monitor settings, the color of the lamp may vary from one computer to another.
- Handmade in my Southwest Florida studio with top quality components.
- As with any handmade item, this lamp should be handled with care, this will ensure many years of enjoyment.
Thank you!
Custom listing for two (2) wall sconces with the following specifications:
- Base: 5 inches - Width: 5 Inches - Fixture Height: 13 inches - Total Depth: 6 inches (from the wall to the outer side of the fixture) - Shades Size: 4-1/2 inches X 6-1/4 inches
TECHNICAL SPECIFICATIONS:
- Voltage: 110-240V - Max Wattage: 60 watts/socket - Socket Type: Medium Base (E26) - Installation: Hardwired - Finish: Black and brushed brass - Configuration: Flat back plate in brass and a wider middle part, black shades, 2 rings on each side of the center band (4 rings per sconce) — ring #1 immediately adjacent to the shade having the same diameter as the “in-contact” part of the shade; and the ring #2 sitting towards the center and having slightly larger diameter spaced like in the example sconce (refer to messages).
*Compatible with medium base bulbs including Edison, LED, and CFL.
Feel free to contact me if you have any questions or comments.
NOTES:
- Lead Time: 4 weeks, earlier if possible.
- Any imperfections present on the lamp are inherent to the handmade nature of this light.
- All hand finishes might show variations in tone and/or little imperfections, this is to be expected.
- Due to variations on computer monitor settings, the color of the lamp may vary from one computer to another.
- Handmade in my Southwest Florida studio with top quality components.
- As with any handmade item, this lamp should be handled with care, this will ensure many years of enjoyment.
Image 1 of 1